Detailed Product Description

Slotted Angles & Accessories
Slotted angles in 40mm, 60mm and 80mm with thickness ranging from 1. 6mm to 3. 15mm depending upon load bearing capacities. Due to very convenient combination of hole locations the systems can be easily configured to meet any storage demands. 
PANELS
8 bend panels with standard lengths of 3 feet and varying widths of 12in, 15in, 18in and 24in. These panels are available in varying thickness from 0. 8mm to 1. 6mm
CLADDING SHEETS
Cladding sheets (side & back) can be cladded to storage system for storing small components, thus providing a shuttering effect to the rack. 
CORNER PLATES
These corner plates provide the required stability in the system. 
2-BEND PANEL
2-Bend Panels in standard lengths of 905mm, 1200mm & varying widths of 152mm to 229mm only. These panels are available in varying thickness from 1. 6mm to 2. 5mm. Non standard length up to 3000mm can also be provided for the required widths. Locations the systems can be easily configured to meet any storage demands. 
4 BEND PANEL
4-Bend Panels in standard lengths of 905mm, 1200mm & varying widths of 152mm to 229mm only. These panels are available in varying thickness from 1. 6mm to 2. 5mm. Non standard length up to 3000mm can also be provided for the required widths. 
FLOOR GRATINGS
The gratings in 'C' section roll formed from 1. 6mm thick HR steel and span varying from 900mm upto 3000mm. 
PARTITION PLATES
These are offered in 0. 6mm thickness and are used to convert a shelf into very convenient compartments suiting individual needs. 
DECKING
These panels are used for covering space over structures. These come in varying lengths of 700mm to 1200mm depending on pallet width. These are offered in 150mm & 230mm sections with thickness varying from 0. 8mm to 1. 6mm. 
BEAMS
Beams provide a comprehensive range of Strengths to cater for any load upto 9000 Kgs. Per pair withBox Section Beams / stepped section Beams, Beam Connector and Safety Lock. 
VERTICAL CHANNELS
The upright frames are available for standard heights upto 3 meters. If frames higher than 3 meters are required, multiple upright frames are assembled with a splicing system. 
BRACINGS
Diagonal bracing's & Horizontal bracing's are of Hallow tubes / angles. Bracing is bolted directly to the uprights with bolts to ensure greater rigidity & strength to the frame.