Detailed Product Description

The walk on load bearing roof system, not only provides the area with an environmentally controlled airflow, with the control of pressure, temperature, humidity and filtration systems being placed at high level, but also allows for access of maintenance personnel whilst not encroaching within clean room envelope.Ceiling system is designed not only to achieve its load bearing function but to add clean single joints to create a sleek clean flush surface. Innovative plank system allows the overall load of the ceiling to be spread by interconnection of joints on the panel edges, whilst being supported at the intermediate points by lattice beams over head, with a load of 150kgs which includes 2 persons with toolkits.Design engineers will calculate all loadings required to incorporate flush light fittings, HEPA filters, diffusers etc. Load bearing ceiling system is fully de-mountable and compatible with our wall systems and will meet all requirements where hygiene and cleanliness are a requirement. Technical Specifications :Ceiling body Ceiling Panels 79.5 mm thick from nominally 0.8 mm thick GPSP zero spangle steel sheet with riveted construction. Ceiling panel Infill Mineral fiber /Paper Honeycomb/Puf Finish Polyester powder coating. Joints Infill Silicone Joint Provisions Cutouts for lighting, Air raisers, filters and HVAC. Note : The sizes of panels and ceilings depend on customer requirement and site conditions